TB6612FNG Dual DC Stepper Motor Driver Module For Arduino Microcontroller Better than L298N
✅ Top Quality Products and Low-Risk Purchased
Find the right products to sell online from thousands of quality products sourced from trusted China suppliers. and start selling them instantly, without stockpiling inventory. Electronics, fashion, beauty, phones, or accessories.
✅ Trackable Delivery
Parcel shipped via ePacket, China Post, AliExpress Shipping, or UPS/DHL/FedEx.
✅ Get your brand logo printed on order packages
Put your brand logo stickers on order packages shipped from China. Just talk to our support team to get your logo on order boxes.
✅ 24/7 Support
We’re here to help! Our support team is available 24/7 and dedicated to helping grow your brand fast.
The TB6612FNG motor driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes – CW, CCW, short-brake, and stop. The two motor outputs (A and B) can be separately controlled, the speed of each motor is controlled via a PWM input signal with a frequency up to 100kHz. The STBY pin should be pulled high to take the motor out of standby mode.
Logic supply voltage (VCC) can be in the range of 2.7-5.5VDC, while the motor supply (VM) is limited to a maximum voltage of 15VDC. The output current is rated up to 1.2A per channel (or up to 3.2A for a short, single pulse).
All pins of the TB6612FNG are broken out into two 0.1″ pitch headers; the pins are arranged such that input pins are on one side and output pins are on the other.
Power supply voltage: VM=15V max, VCC=2.7-5.5V
Output current: Iout=1.2A(average) / 3.2A (peak)
Standby control to save power
Maximum PWM frequency: 100 kHz
Reverse voltage protection
CW/CCW/short brake/stop motor control modes
Built-in thermal shutdown circuit and low voltage detecting circuit
All pins of the TB6612FNG broken out to 0.1″ spaced pins
Filtering capacitors on both supply wires.
Dimensions: 20mm x 20mm
|Dimensions||2 × 2 × 0.1 cm|